Install H1 H7 LED Headlight Bulbs, You May Need Adapters.
LED Headlight bulbs have become popular nowadays. Many people feel just like to update their factory halogen lights into LED types. Some would not know very well what bulbs match their cars since lights, some individuals would ask the product sales service about the light bulb plug-type fitting before putting a purchase. Some have checked their car manual and buy by themselves. However, some people would find that the bulbs cannot be installed on their vehicles such like H7 or H1 bulbs. And what happens?
Vehicles like Volkswagen, Audi, BMW, Hyundai and Kia may have this problem, especially Volkswagen Jetta. The reason why the bulbs cannot be installed is lacking the headlight base holder. The holder can hold the bulbs right at the headlight position. Some vehicles may have the holders so they can easily install the bulbs, while some vehicles like Volkswagen Jetta do not have that holder separated with the halogen bulbs, so you cannot use them with the LED bulbs. Luckily, as the led headlight conversion kit factory, we also supply the H1 and H7 led headlight bulbs holders in low price. You can check here.
And they fit to the car models below.
KIA K3 / K4 / K5
HYUNDAI SONATA 8(2011-2015)
HYUNDAI Grand Santa Fe
HYUNDAI SONATA 9(2015-now)
HYUNDAI Santa Fe
Hyundai 2017 MISTRA
MERCEDES B/ML series
VW Jetta 5(2005-2011)
VW Jetta 6 (2011-Now)
VW Passat B7
VW GOLF 5
VW GOLF 6
VW GOLF 7
VW PASSAT B7 FWD 1.8T
VW New Touran
BMW 5-Series 6(2010-2016)
BMW SERIES 5
Ford Fox Low Beam
Ford 2017 Kuga
Skoda Old Octavia
With those headIight bulbs adapters, it is simple to upgrade your headlight bulbs with LEDs. Every light bulb includes a bulb adapter and now we are talking the problem you cannot install with the initial bulb holders. The installation for those who cannot use the original H7 bulbs adapters.
Disconnect the circuit
Unplug and take off the factory halogen bulbs
Separate the adapter base from the H7 bulbs
Fix the compatible light bulb adapter and lock it up with the exterior clip. Twist the light bulb to tighten it up
Connect the circuit and be sure you connect the same terminals +/-
Do it once again on the other hand and change the light on and check whether it’s OK.
Some cars needed H1 bulbs is possible to have the same problem like H7 will. And you’ll need to remove the lights holder before installations.